Where Safety Meets Expert Tree Service.
The selective removal of live branches to reduce crown density.
Kenmore's street-tree inventory lists 12,435 trees, and Douglas-fir is the most common at 11.3%. Red alder and bigleaf maple also make the top five. If you have a tall conifer or a broadleaf with a dense crown, thinning is one way to let wind and light pass through it.
Crown thinning removes selected small branches throughout the canopy. It does not shrink the tree or change its shape. Below is how the work goes and what to decide before you book it.
Crown thinning helps improve your tree’s structure by selectively removing live branches to reduce density in the canopy. This process is ideal for homeowners who want better light penetration and increased air movement through their trees while reducing wind load. We work with you to determine if this service fits the specific needs of your landscape.
This service involves carefully selecting cuts that match the tree species, site conditions, and current access limitations. Our goal is to enhance health and appearance without over-pruning or causing stress to the living tissue. By lowering wind resistance, we help protect both the trees and nearby structures from potential damage during storms.
We begin by assessing your canopy condition and defining clear pruning objectives for each tree on site. Trained crews then make clean cuts at proper points using methods suited to the specific species and season. Afterward, all cut material is processed through a wood chipper before we thoroughly clean up the work area around your property.
Our teams utilize hand saws, pole saws, chainsaws, and climbing or rigging gear depending on the tree’s height and location. When necessary, aerial lifts are deployed to safely reach higher branches that require attention. We also use wood chippers to efficiently process removed limbs and personal protective equipment for everyone involved in the job.
Safety is a priority as we follow recognized pruning standards to avoid making harmful cuts or removing too much healthy tissue at once. Our crews stay alert for overhead power lines and unstable limbs that could pose risks during removal work. When working aloft, our technicians always use proper fall protection gear to ensure everyone stays secure throughout the project.
You may need crown thinning if you notice deadwood or weak unions in your trees that increase the risk of branch failure. Interference with sightlines or structures caused by an overly dense canopy is another clear indicator that this service would be beneficial. If wind seems to push against a heavy top, reducing density can help stabilize the tree and improve its overall vigor over time.
The final cost depends on factors like species-specific timing sensitivities which dictate when certain trees should not be pruned. Access requirements for aerial lifts or climbing gear will also influence how much labor is needed to complete the job safely. Additionally, the volume of cut material that must be processed through a wood chipper plays a role in determining the overall price.
In our local climate, it is best to schedule this work outside of late spring and early summer when many native trees are actively transpiring. We often recommend dormant seasons or specific windows dictated by individual species requirements to ensure healthy healing after cuts. Planning ahead for these seasonal constraints helps us provide the highest quality care without harming your landscape’s natural cycle.
Crown thinning means removing a limited number of live branches spread evenly through the crown. The aim is to reduce density, not height. Standard practice under ISA and ANSI A300 pruning guidance is to keep the tree's natural form and leave most of the foliage in place.
That last point comes from the WSU Extension Pacific Northwest Gardener's Handbook, Chapter 23, on pruning woody landscape plants. A limb that tears bark leaves a larger wound than a clean cut, so the cutting order matters as much as which limb comes off.
The forecast zone that includes Kenmore had 33 high and strong wind episodes from 2005 to 2025. That is a zone-wide figure, not a reading for your yard. It is still a fair reason to look at dense crowns on tall trees, since thinning can let air move through instead of pushing against a full canopy. It will not make a weak or decayed tree safe, so we look at the trunk and union points first.
Douglas-fir, western red cedar, bigleaf maple, and red alder all grow differently, so the amount of thinning differs by species. Conifers often need little crown work beyond deadwood and a few select limbs. Maples can handle more. We avoid removing too much live crown at once, because heavy cuts can stress a tree.
Kenmore sits in USDA zone 9a, with some parts at 8b, so the mild climate means pruning timing has some flexibility. If you are unsure whether a tree needs thinning, a free estimate with our ISA Certified Arborist is a good place to start. Call or text 425-484-4442.
| USDA hardiness zone | 9a (8b to 9a across the city) |
|---|---|
| Rain and snow falling October to April | 81% of the year’s total |
| Tree canopy | Among the most heavily treed Puget Sound cities (satellite data) |
| Days that freeze at night and thaw by day | 30 a year |
| Electric utility | Puget Sound Energy (PSE) |
Puget Sound Energy (PSE): Service line (wire from PSE pole to home or meter pole): PSE does not trim it; homeowner/private arborist trims.
PSE performs a safety disconnection so the homeowner or private tree trimmer/arborist can work; Call at least 5 business days ahead to check crew availability and potential charges.
Safety disconnect: 1-888-321-7779 (5+ business days ahead). Utility page.
Any fee for a disconnect is set by the utility.
Share of 12,435 trees in the city’s street-tree inventory; median trunk diameter 10.0 in, 14.0% at 24 in or wider.
Sources: Daymet daily weather (NASA/ORNL), NOAA Storm Events, USDA plant hardiness map 2023, NRCS soil survey, USGS elevation, WA DNR landslide inventory, USDA Forest Service aerial survey, WSDA, city tree assessments and street-tree inventories, SILVIS Lab, Arbor Day Foundation, and official city and utility pages.